This item has been shown 46142 times.
P28 SpecOBD1 Vtec ECU by Advanced Ignition!
What you will be receiving:
1) Re-furbished OBD1 Vtec Honda ECU that has been Chipped & Socketed (This ECU can be used for a P72, P28, P07 or ANY Vtec OBD1 ECU)
1) Custom Tunedor Stockmapping on NewSST reburnableChip
-90 day warranty included!
Notice: We replace all of thecapacitors that are prone to leaking over time.This is a common problem we see often, the ecu board become's damaged due to the capacitors leaking on the ecu board.
Our ECU's are programmed for your setup,not somerandom chip that is for who knows what kind of motor. I have seen Horsepower increases between 10-20HP in the midrange with B series motors with basic bolt ons. Not only doour ecus make power, but they make it there safely. Why buy expensive parts for your motor and skimp on the ECU?
These ECU's will fit directly into 92-95 Honda and Acura's with manual transmission. If you have a 88-91(OBD0) or a 96+(OBD2) vehicle you will need an OBD1conversion harness.
Willwork with the following motors:
-All B16 motors
-All H22 motors -H23 vtec
-F23 block/H22a headhybridaka G23
-B18c5 -B18c1- B18c
-GSR, Type R, LS/Vtec, B20/Vtec
-Contact us if you motor is not listed
- Engine Code & any mods done to the engine
- Year & Model of the car
- Rev limit
- Vtec RPM
- any sensors to disable
- any other important info to add
- Speed governor removed
-Add IAB control(free $20 value)
- Optional 2 step (launch control)
- Optional Knock sensordisable
Optional cel shift light
-Optional 02 sensor disable
-Optional Vtec pressure switch disable
(Red lineAdvanced Ignitionvs blue line competitors)
**Compatible with Hondata s100 / s200 -Neptune, eCtune, Crome, Uberdata, Moates ostrich, Demon boardand more.**
Another huge benefit for our customers who have purchased on of our chipped ECU's is the ability to quickly change your chip to use with any engine needed. Our chipped ECUs will be one of the best investments you ever make on your Honda!